TL;DR Dewatering in construction excavations is governed by 29 CFR 1926.651(h). Employees shall not enter an excavation with accumulated or accumulating water unless adequate precautions are in place. The six primary dewatering hazards are: soil […]
TL;DR A construction safety risk assessment is the employer’s structured process for identifying, evaluating, and controlling jobsite hazards before work begins. 29 CFR 1926.20(b) requires frequent and regular inspections by a competent person; 29 CFR […]
A PSM hot work permit is required for hot work performed on or near a process covered by OSHA Process Safety Management. Under 29 CFR 1910.119(k), the permit must document that applicable fire-prevention and protection requirements have been […]
OSHA 1910.109 and Process Safety Management intersect most directly in paragraph 1910.109(k). Under 29 CFR 1910.109(k)(2) and (k)(3), the manufacture of explosives and the manufacture of pyrotechnics must comply with 29 CFR 1910.119. This is a narrow but […]
osha-1910-119-appendix-a OSHA 1910.119 Appendix A provides the threshold quantities used for one important PSM coverage route. The official table identifies each entry by chemical name, Chemical Abstracts Service number where available, and threshold quantity in […]
A PSM block flow diagram or simplified process flow diagram provides a visual overview of the covered process and its major streams. Under 29 CFR 1910.119(d)(2)(i)(B), process-technology information must include a block flow diagram or simplified process flow […]
Hot Work Permit Requirements Under 29 CFR 1910.119(k) A PSM hot work permit is required for hot work performed on or near a process covered by OSHA Process Safety Management. Under 29 CFR 1910.119(k), the permit must document […]
Purpose These Mechanical and Heavy Equipment Safety Officer Test Preparation interview questions are commonly asked during Safety Officer interviews on Saudi Aramco and large-scale construction projects. This chapter covers operator certification, work permit protocol, elevating […]
Purpose Painting and Coating Safety Test Preparation is an essential study guide for Safety Officers preparing for interviews, certification exams, and industrial safety assessments. This Painting and Coating Safety Test Preparation guide explains painting hazards, […]
Copyright © 2026 | MH Magazine WordPress Theme by MH Themes
